I love this model but it was not really printable. So I cut it up, added pins for aligning parts, and rotated everything to make it easy to print. You will need supports for the hands and head, but everything else should print without support. The parts are cut assuming your printer has a tolerance of .2mm (my calibrated ANET A8 should be .2). I did not setup print layouts because you know your printer best. And if you want/need the full assembled 3d model, go see the original that I remixed from. It really is a beautiful model. Completed model stands about 5in tall.
Printer:
ANET A8
Rafts:
Doesn't Matter
Supports:
Yes
Resolution:
High
Infill:
10% or more
Notes:
most parts don't need support. Just hands, head, and maybe feet.
