---- Flail - Morning Star ----
Tried to make a Flail / MorningStar.
I sliced it with Simplify3D
Everything was printed in 0.20 (infill 100%)
except for...
Shaft 0.24 (infill 10%)
Sphere 0.24 (infill 100%)
You need to print:
2x Spheres (Outline/Perimiter Shells 4-5 min)
18x Spikes
1x the rest
The "Sphere centering ring" is optional, I just found it easier when glueing the Sphere halves together.
The Chain is not mine, its from "Chain Generator" here on Thingiverse
Start printing the Chain.
Then print the "Chain Lock" and during the print insert one end of the Chain.
Then print the "End Cap Top" this time insert the other end of the Chain.
Print the rest and glue together Sphere halves and Spikes.
This is just how I printed mine.
If you have any questions, please feel free to ask.
NB. The best glue for PLA is "Loctite super glue GEL" (just my oppinion)
Printer:
Creality CR8
Rafts:
No
Supports:
No
Resolution:
0.20 - 0.24
Infill:
10 - 100%
