Double-sided formula 1, toy for children. It is customizable. I produce it on a 3D printer from PLA, multi-colored parts print using the M600 command in the g-code. There is no need glue to assembly. Use stainless steel wires d = 3mm, length 65mm on the wheel axes (or you can use ordinary nails).
Explore real-time rendered 3D model: https://skfb.ly/6yv8S
Visit facebook for more info https://www.facebook.com/OboustrannaFormule/
Enjoy!
Printer Brand:
Prusa
Printer:
Supports:
Yes
Resolution:
0,2mm
Infill:
20%
Notes:
Some parts need supports (hoods, drivers). Use supports on build plate only and set overhang treshold 45°.
All parts need 3 perimeters and 4 top and bottom solid layers.
Swap colors by M600 command in these layers (or you can use Prusa Control to set up):
stripes on hood: 8,55; 11,95; 19,75; 23,15
titles on spoilers: 1,15; 1,75
Print of all parts takes approx. 12 hours.
