This model was created based on the "Master Cylinder" from the Felix the Cat cartoons. Two versions are supplied, a one-piece body and a body shell with an insert shell and attachable feet (glued). Both versions have arms attached using M3-.05 x 12mm screws. M3 nuts are inserted into the inside pockets of the outer shell for the multi-piece version. In most of the cartoons the character is not shown with feet. They can be eliminated if you want to set the character alone on a flat surface. The outline of the eyes can be done using a Sharpie Ultra Fine marker. I used white model paint for the eyes also. A PDF template of the screen is supplied if you want to use paper cut-outs. The model is supplied with a removable base.
Printer Brand:
Prusa
Printer:
Rafts:
No
Supports:
Yes
Resolution:
0.2mm
Infill:
100% or 25% (one-piece body)
