by Davision3d
All 4 Ninja Turtles, Leo (Leonardo), Raph (Raphael), Mikey (Michaelangelo) and Donny (Donatello) as adorable little Low Poly figures.
They are posed ready for battle and print without any support!
The default size is as tiny as possible (Same size as the Low Poly Tabletop figures)
If you are not sure about your printers capability print them at 150% instead.
I recommend 200% if you like to paint them.
The tiny ones in the pictures is the default size while the other ones incl. the painted ones are 200%.
If you like to have the eyes white I recommend cutting out little paper triangles and putting them inside the holes. Triangles should be all sides same length because of the angle inside the eyes. (The painted ones have those paper eyes)
Since they have the same pedestals as the Low Poly Fantasy Tabletop figures they can also be put in the hex grid slots: https://www.thingiverse.com/thing:1255723 But they can be hard to position close together since their weapons are quite big.
Rafts:
No
Supports:
No
Notes:
At the tiny default size I recommend printing more than one at once so there is more time between the layers.
