by Saberpeep
Meet Artemis, the first in a series of 3D-printable snap together action figures with interchangeable parts! Over time I will be designing and releasing more robots and addon parts so you can mix and match and customize your own Snap Bot. In the meantime, feel free to edit and customize the current parts and make your own and upload them as a Remix, I'd love to see what you can do!
Artemis is a military-spec bot equipped with reactive armor, rugged components, and a chunky military design.
Printer:
AnyCubic Kossel Pulley
Rafts:
No
Supports:
Yes
Resolution:
0.2 (or dynamic)
Infill:
15 (or dynamic)
Notes:
All parts should already be oriented the way they should be printed.
However just in case, ensure all mid-size pegs (used on the double joints, neck, wrists, etc.) are printed parallel to the print bed with their split perpendicular to the print bed or they will likely snap during insertion.
Print one of each part unless otherwise specified in the file name (eg. X2, X4, etc.).
Refer to the exploded diagrams in the included images during assembly.
Don't forget to upload photos of your finished figure to the Makes section, I'd love to see yours!
Cleaning Up Pegs
If you find them too hard to insert, The mid-size pegs (used on the double joints, neck, wrists, etc.) will likely need trimming and sanding along the sides perpendicular to the split. Try not to remove material from anywhere else on the peg (such as along the round flange) as it may add play to the joint once assembled.
