by PengLord
This airbrush stand can hold 1 to 3 different airbrushes,
I have tested the following arms:
Paasche Gravity: Paasche TG Talon
Badger Siphon: Badger 155 Anthem, Harbor Freight Deluxe (Central Pneumatic)
I have not tested the Paasche Siphon nor the Badger Gravity holders but I think they should work based on photos I've seen and compared to my own brushes.
I speculate that the Badger holders will also work with Iwata brushes but have not tested them
The "Universal" arm has been tested to hold my Badger and Harbor Freight siphon feed brushes. I do caution that due to the design, the brush will sag a bit.
The base is a very tight fit, you may need to file it slightly. This is intentional so that glue is not required.
Please feel free to make your own arms or post in the comments with your brush model information (make, model, diameter, distance from air connection to trigger/hopper) and I can slap a new arm together.
Designed in Fusion360
Printer Brand:
Prusa
Printer:
Supports:
No
Resolution:
.2mm
Infill:
20%
