by Delta_Makes
This is a 28mm scale Coastal/River boat intended for use with the Konflikt 47 game system, but do whatever.
I've labeled it as a WIP because I haven't done any final test prints yet. I'll remove the WIP status when I do and find everything to be satisfactory.
Print with supports (should be easy to remove, I made sure of that), otherwise, I'm unsure if any particular print settings are required, I print at .1 layer height and it works just fine.
The open space towards the rear is for an anti-air mount(dshk HMG).
This is my own personal design, but I drew heavy inspirations from the Bronokater Soviet Armoured Patrol Boat
