by Taython
This is a simple dice tower. It can handle quite a few dice at a time. It can be printed on a small printer (118mm cubed) no supports needed. It prints in two pieces and assembles with only a little super glue. There are two different designs for the dice tray (with and without a floor).
Printer Brand:
Monoprice
Printer:
Select Mini
Rafts:
No
Supports:
No
Resolution:
.2
Infill:
22%
Filament: 3D Solutech pla white
Assemble the top and bottom with just a little super glue and then let dry.
