by Koteldash

I have a MP Select Mini V2 and the print bed is mall, so I can't print large prints or anything over 4.5" so.. I split this model into two parts:

Head and body,

When I printed this I split the head and body and printed them separatel (better quality)
Max size that fitted my priter was 0.919. Make sure that you print both parts in SAME SIZE

Enjoy

Print Settings

Printer Brand:                          

Monoprice

Printer:                          

Select Mini

Rafts:                          

Doesn't Matter

Supports:                          

Yes

Resolution:                          

0.1

Infill:                          

20

Filament:                                            Hatchbox PLA                                        Black                                        

Notes:

Here are my setting for a spactacular print quality:

Layer Height (mm):      0.1
Shell thinkness (mm):  0.8
Enable retraction       check

Bottom/Top thickness mm : 0.4
Fill Density %  :                    20

Print Speed (mm/s):             25
Printing temp:                      195
Bed Temp:                            50

Support type:                     Touching buildplate ^
Structure type:                Grid
Overhang angle deg:      45
Fill amount %                  15
Distance X/Y (mm):         0.7
Distance Z (mm):            0.15

Diameter (mm)                     1.75
Flow(%)                                100