by Areg7
This is an RC ship that is modeled directly after USCG FRC. Its 4'6" if printed at 100% scale. It can handle roughly 8" seas. The hull must be modified to accept whatever propulsion system you want to use. For steering I just put a wedge between the two screws and used differential thrust to steer it. It also has a bow thruster that allows it to turn within its own length.
Printer Brand:
Creality
Printer:
CR-10
Rafts:
No
Supports:
No
Infill:
100% on the Hull
Notes:
This took about 120 hrs.
The superstructure needs to be sanded to fit into the hull. This is so that it will be a tight friction fit and not require magnets or another fastener type.
