This was my first attempt modeling a car in AutoCAD and then 3D printing it. I based it on a Suzuki Vitara/Sidekick/ Geo Tracker. It's far from a perfect replica but I'm happy with it as of right now. It prints in place with moving tires. You'll have to wiggle the tires a bit after printing to get them to break loose and rotate.
I printed this on my HicTOP Printer at .2 res and 20% infill using supports and a brim. It should print fine with either ABS or PLA.
It might work when scaled up, I haven't tried it.
I might re-visit this design in the future and adjust it.
Please post up makes if you make one!
Printer:
HicTOP
Rafts:
No
Supports:
Yes
Resolution:
.2
Infill:
20%
Filament: Hatchbox ABS Black
