by Ghukek
This is one of my free models, the Svetlana-class cruiser.
I'll be putting the rest of my free models up here over time, but in the meantime you can find them on my website.
Print at 150% for 1/1200 scale and 75% for 1/2400 scale. 1/1200 comes out very nice but I recommend trying 1/2400 with a resin printer for best results.
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
Yes
Supports:
Yes
Resolution:
100 microns
Infill:
30%
Filament: Hatchbox PLA Grey
Notes:
I recommend using custom supports or set your support generation settings to a very high angle such as 75 degrees. Personally I only use supports on some of the guns. The rest of the ship really doesn't need supports.
