Since this figure consists of only a single volume, it is very easy to print this model. You should only make sure that the figure is very well supported during printing. To reflect the high level of detail, you should support overhangs as low as 50 degrees (depends on the slicing software).
The support structure must be removed very carefully after printing, so as not to damage the figure.
All wall thicknesses are optimized for printing with 0.4mm extruder nozzles.
The model of this figure is non-penetrating, has no open or multiple edges and the elements are correctly oriented. Thus, the model should be able to be processed with most slicing programs without any problems.
More figures here:
https://www.printable-3d-models.com/de/3d-druckvorlagen/figuren/sexy-girls/
Have fun printing!
