by Phongpp
Hi,
This is MIG 15 scale model 1/48 3D Printed. It's easy to print without turn on support and also easy to assemble.
If you have any questions, query or anythings just leave your comments or email me to: [email protected], I will try to reach you all.
If you want to support me, YOU can do it on patreon, paypal. I am very appreciated your support, even with small amount it can encourage and help me a lot. Thank you for your considering supporting my work.
My Patreon:https://www.patreon.com/VUIKHOAHOC
My Paypal:https://paypal.me/phongpp
Print Settings
Printer:
Anycubic Kossel Plus
Rafts:
No
Supports:
No
Resolution:
0.2mm
Infill:
40%
Filament_brand:
Anycubic
Filament_material:
1.75mm PLA
Notes:
Nozzle: 0.4mm Layer Height: 0.2mm Wall Thickness: 0.8mm Top/Bottom Thickness: 0.8mm Infill: 40% Printing Temp: 196 C Build Plate Temp: 40 C Speed: 30mm/s Cooling Fan: ON Support: NO (I've already create support where needed) Build Plate Adhesion: Brim Note: Position with Build Plate should same as picture shown
Custom Section
