Quelaag, the Chaos Witch from Dark Souls! Typically, I don't like to print models or post models in pieces, but for her, I had to do it this way to make her print to my satisfaction.
The model parts should be printed at the following %'s if you are aiming to print at the same size as the one in the picture:
For the human body, print at 500%
For the DS boss base, print at 500%
For the main body and all legs, print at 2200% (or 2000% if you want the human body to stand out a little more).
Note: Added the .stl for the complete model and the complete model including the DS:BG base if you want to give that a try.
Print Settings
Printer brand:
Creality
Printer:
Ender 3
Rafts:
Yes
Supports:
Yes
Infill:
20%
Filament_brand:
N/A
Filament_color:
N/A
Filament_material:
PLA+
Notes:
Printed at layer height: 0.08mm .
Post-Printing
Used XTC-3D after gluing all the parts together.
