replacement display stand for Diamond Select's uss Enterprise D and E (may work for others)
requiters a 1/2 inch dowel rod, and sometimes a 1/2 inch drill bit.
the adapter is for the Enterprise D and may need some epoxy glue, it replaces the white plastic bit that the ball pivot is in.
the Enterprise E ball pivot can be pushed out from inside the battery cover and the dowel rod will fit in the hole perfectly.
Printer: Wanhao i3
Rafts: No
Supports: No
Resolution: any, but i used .3
Infill: if using PETG, 35+
Notes:
using PETG i had to increase my heat bed temperature to 90c (and re-level it) to stop the print from lifting. extra note: my normal heat bed temperature is 70c, but i find larger parts need higher temperatures to prevent warping.
