by Dero1234
This is the Tender for my Model thing:4604977
It is held together using 1.75mm filament, melted or glued as if rivets. As pictures show, if 2mm hole is not through model, glue filament in it, sticking out 15mm or so. Stick that glued filament through the hole of the joining part and melt end.
The axels are glued together with a 5mm rod, 170.5mm long, inside the hollow. The rod sticks out both sides 10mm.
Assembly pictures will be uploaded soon.
Print Settings
Printer:
FlyingBear Ghost 4S
Supports:
No
Resolution:
0.2
Infill:
25%
Filament_brand:
Inland
Filament_color:
RED
Filament_material:
PLA
