by ClkWrks
Model of Starship Delivery Robot, I designed it in Fusion 360 from pictures and memory so not all dimensions are accurate. Small outcropped peg on the left side can be used to mount a flagpole from fine wire.
Can be printed 50-100% original size. Test printed at 60% size using 0.2mm layer height and 20% infill on PLA+.
Print Settings
Printer brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
Yes
Resolution:
0.16
Infill:
20%
Filament_brand:
SunLu
Filament_color:
Black
Filament_material:
PLA+
Notes:
I used Polyflex TPU, with tree supports with the camera mount printed on its side. Print Speed of 20mm/s.
Post-Printing
Prime
Clean up print (if needed) with fine sandpaper and exacto knife. Prime pieces seperately with suitable primer-filler spray. I found a good way to do this is to stick the wheels face-up onto a length of upside down masking tape to keep them from blowing away
Attach Wheels
The body has small outcroppings to assist in wheel placement, secure wheels carefully using superglue. I recommend painting the model prior to attaching the wheels.
