by MoffKalast 

Now that the Arquitens class made a central role appearance as Moff Gideon's flagship in the latest season of The Mandalorian I've been able to completely rework my old model from new reference photos, adding new design changes and lots of extra detail, while optimizing and slicing it for a larger print size.

The provided 1:2000 scale puts it at about 16cm long, which is probably the smallest size at which you'd want to print this model. I'd go larger but then it wouldn't fit with the rest of my 1:2000 ships.

It also features an open hangar bay with a tiny TIE fighter inside. If you want to print in a really large scale I suggest removing it and replacing it with a more high def TIE model or the lambda shuttle.

I'm really looking forward to seeing what you guys make of it. I've seen to it personally that all normals are facing the right way, Commander. There will be nothing to stop you this time! :)

Print Settings

Printer brand:

Creality

Printer:

Ender 3 Pro

Rafts:

No

Supports:

No

Resolution:

0.12, 0.08 for turrets

Infill:

10%

Filament_brand:

Sainsmart

Filament_color:

Black

Filament_material:

PLA

Notes:

Most parts should print with little to no overhangs, except engines_1 which requires a little bridging but it should be fine as long as your printer is tuned well enough.

The turrets are available in 2 ways: sliced and unsliced. The unsliced ones print well enough in the provided orientation and they're pretty tiny anyhow so the sliced version is just intended for larger scales. Print the turret 4 times and glue as shown in photos, two on top two on bottom.