I was making a Daemon Prince of Nurgle and thought a big square sword with three eyes along the blade would be dope and couldn't find one. I green-stuffed some eyelids and some meat-- highly recommend doing (can see via my Instagram @iPaintSmallThings). Also, making the spheres power orbs could be cool, too! I've included versions without the spheres as well.
Will need to be scaled down for smaller minis. I scaled it to ~75% to fit a human sized 28mm heroic scale mini. Also, when scaled down the print can be a little flimsy-- so I recommend using some super glue to reinforce the blade and the ring on the hilt.
The sword blade does not need supports if printed with the top of the blade on the print bed, but the hilt does. My hilt support instructions: Flip the print upside-down, rotate about 45%, and add some light supports on the bottom of the ring, the bottom of the hilt, and one in the center of the handle.
Printing the full sword shouldn't need supports. Just print it upside-down with the top of the blade on the print bed.
Enjoy
Print Settings
Printer:
Elegoo Mars
Rafts:
No
Supports:
No
Resolution:
0.025
Infill:
100%
Filament brand:
Elegoo
Filament color:
Grey
Filament material:
RESIN
Notes:
I haven't tried printing it on a filament printer.
