Printer Brand:
LulzBot
Printer:
TAZ 5
Rafts:
No
Supports:
Yes
Resolution:
0.25 mm layer height
Infill:
20ish
Notes:
This model printed very well on its side with minimal support between the legs and supporting the neck/head. I used GizmoDork's woodfill for this project. It's the only wood particle filled filament I have use and I have to say it typically looks nice and is cheaper than many of the other wood filaments out there I have seen.
The biggest design flaw I've noticed in the model is that there is very little surface connecting the neck to the body, but fortunately a little super glue fixed it before it popped off. I've noticed standard super glue works VERY well on this woodfill filament.
