This little gun (50 x 10 x 10mm)
It uses a simple cloths pegs spring to as a trigger to push the arrow along and out of the gun to more than 20′.
I designed it in max, it took a few adjustments to make it what you see, i may still alter it but works great as it is. with little assembly required your be shooting in no time.
you will need one metal peg spring from a cloths peg.
Printer:
101Hero
Rafts:
No
Supports:
No
Resolution:
0.2
Infill:
15%
Notes:
there are two tiny supports built in to the model, once printed these should easily come away.
if you wish to print without these, in cura you can split object into parts and delete.
Assembly
once printed.
Remove the supports if you have printed with them - these should come away very easy.
Take peg spring insert left arm into small hole at bottom.
then bend right arm and insert in to the main bay
the spring part should now be the same side as the barrel.
pull the spring down and around to the back of the gun as this will give you more tension.
once spring is loaded insert arrow into the barrel and push spring back - it should slot in to the dip and sit there, it may need some help
Once loaded and cocked, Hold, Aim and press on the spring like a normal trigger. the arrow should fly out of the gun.
Happy Shooting!
