Required materials:
-2 motors
-2 microswitches
-Arduino smartcar gearbox
Instructions:
Print all parts except Tube.stl
Epoxy clear Rightshell2 to Rightshell
Do wiring, lipo connector goes into the rectangle hole towards the battery bay
install other components
Fuse left shell2 with left shell using epoxy
Epoxy half of the Top rail to left OR right side.
Print Tube.stl in ABS!!!! Then sand the inside of the tube and stick it in and glue in place.
Print Nerf Stock Port.stl 2x but the other is mirror inverted
Glue them onto the back of the blaster to form a nerf stock attachment point
pew pew pew!
